| Careers |  Makita Global
Makita Gulf FZE
BL Motor
SJS System
Extreme Stamina Life time work volume
The charger communicates with the individual cell in battery and then it controls current, voltage, and temperature.Both rapid and optimum charges are achieved. It makes battery life longer.
Total Power Delivery Amount of each battery's service lifetime
Note: The numbers in the chart are relative values when the amount of Ni-cd 2.0Ah is indexed at 100.
Build In Memory Chip / CPU
chip_1 battery_charger chip_2
The built-in memory chip in battery records the battery usage history and transmits it to the charger.   The CPU built in charger analyzes its condition; high temperature, re-charge after full charged, over-discharging. The battery lasts long life because it can be charged at the best method and time.
Well Balanced Charging
Capacity Balanced Battery Pack
  Competitor A :
Capacity Unbalanced Battery Pack
tube_1   tube_2

1. It is designed that an individual cell whose condition is fully discharged, works well. It is hard to have over-discharge and an overcharge because the individual cell capacity prevent the inconsistency.

2. It is possible to use it efficiency because the capacity of each cell is not uneven and discharges evenly.


1. Competitor charging system causes to decrease the capacity of the cell, which weakened by the heavy load work because Competitors do not install an optimum charge.

2. Discharge stops by using the capacity of the weakened cell completely, when you use the power tool in the condition, noted as above.
Therefore the capacities of other cells are not used completely, so that workloads are decreased at a charge.

Fast Charging with Cooling fan
cooler_fan   It is necessary to cool down the battery which is high temperature after use. MAKITA has developed the original charger system; Built-in the cooling fan. The stand-by time until the charge starts is greatly shortened by cooling efficiently. In addition, the charger keeps cooling while charging it, and the rapid charge is achieved.  
The charging time in practical condition
In case the battery gets heated to 700C right after use, while being charged in an environment of 250C.
Lightweight and Firm Holding
lighter   firm_holding
Multi-contact terminals reduce electrical resistance and increase connection stability withstanding against vibration, and ultimately ensures stable current supply to the tool.
No Memory Effect and No discharging required Heavy Duty Pack Low Self Discharge
memory_effect heavy_duty_pack low self discharge